Correction After Finalizing A Transaction (Void Mode) - Sharp XE-A137 Instruction Manual

5

Correction after Finalizing a Transaction (Void mode)

When you need to void incorrect entries that are found after finalizing a transaction or cannot be corrected by
direct, indirect void or subtotal void, the following steps should be taken:
1.
Turn the mode switch to the
mode.
2.
Repeat the entries that are recorded on an incorrect receipt. (All data on the
incorrect receipt is removed from register memory; the voided amounts are added
to the void mode transaction totalizer.)
Incorrect receipt
26
position using the mode key, to enter into the void
Cancellation receipt