Chauvet Legend 300E Spot Quick Reference Manual page 6

Legend 300E Spot QRG
Replacing a
1) Turn the fixture off and disconnect it from the power outlet.
Gobo
2) Open the head cover by loosening the four fastening screws at the sides
of the top cover.
3) Separate the gobo plate away from Gobo Wheel 1 by pushing it toward
the front of the moving head (direction 1 in the diagram). Be careful not
to push the gobo out of the gobo plate.
4) Extract the gobo plate l by pulling it outward (direction 2 in the
diagram).
5) On a flat surface, remove the expansion ring that holds the gobo in
place and remove the gobo from the gobo plate.
6) Insert a new gobo and hold it in place with the expansion ring.
7) Slide the tip of the gobo plate under the pressure plate near the center of
Gobo Wheel 1.
8) Push the gobo plate inwards. DO NOT force the gobo plate into the
gobo wheel slot. If correctly installed, the gobo plate should
accommodate itself in the gobo wheel slot.
Page 6
Continued from previous page
MODE 1
Channel Function
(Cont.)
15 Focus
16 Zoom
17 Prism
18
R-Prism
19 Iris
20 Frost
21
Function
End of Mode 1
Page 11
Legend 300E Spot QRG
Value Percent/Setting
000  255 Near~Far
000  255 0~100%
000  008
Normal
009  255
Prism effect
000  127
Index
128  189
Fast~Slow CW rotation
190  193
Stop
194  255
Slow~Fast CCW rotation
000  255 0~100%
000  255 0~100%
000  069
No function
070  079
Enable BO during Pan or Tilt
080  089
Disable BO during Pan or Tilt
090  099
Enable BO during color change
100  109
Disable BO during color change
110  119
Enable BO during gobo change
120  129
Disable BO during gobo change
130  139
Lamp on
140  149
Pan / Tilt reset
150  159
Color / CMY reset
160  169
Gobo 1 / Gobo 2 reset
170  179
Shutter reset
180  189
Focus / zoom. / prism / frost reset
190  199
Iris / flatb reset
200  209
Reset all
210  229
No function
230  239
Lamp off
240  249
Enable flatb
250  255
Disable flatb