Before Camera Use - INSTEON 75790WH Owner's Manual

INSTEON® Wireless IP Camera
1.3.3 Bottom View
The reset button is on the bottom of the camera. To reset the camera to factory default settings, make
sure that power is supplied to the camera, then press and hold reset button for 15 seconds. After reset,
your username and password will return to the factory default administrator username and password.

1.4 Before Camera Use

1.4.1 Software Installation
1) Put the CD in the CD drive of your computer, then open CD
2) Double click IPCamSetup.exe. Follow the onscreen instructions to install camera software.
3) Click Next to complete the software installation
insteon.com
4