Multi-Device Settings - INSTEON 75790WH Owner's Manual

INSTEON® Wireless IP Camera
Here you can set the record file path and the alarm record file path for the camera. Record Path will
store the file of a manual recording. Alarm record path will store the file of the recording when it is
activated by motion (you must set motion alarm first).
Click Browse to choose the path. The default path for both is C:\Documents and Settings\All
Users\Documents.
NOTE: If you are using Windows 7 or Vista, you cannot change the record path. Set it following
the instructions:
Windows 7 or Vista's security level is higher than Windows XP/2000. For "set record path" function,
add the Device IP address to the IE's "Trusted sites": IEToolsInternet OptionsSecurityTrusted
sitesSitesAdd

3.4 Multi-Device Settings

IP Camera Tool can support up to nine cameras simultaneously.
3.4.1 Add Cameras in LAN
In Multi-Device Settings, you can see all of the devices that were found on the LAN. The first device
listed is the default. You can add more cameras in the list for monitoring.
To add an additional camera to monitor, click the selected camera in LAN device list; the alias, host,
and HTTP port boxes will automatically be filled in. Enter the correct username and password, then
click Add. After all cameras have been added, choose Submit.
insteon.com
20