Alarm Service Settings - INSTEON 75790WH Owner's Manual

INSTEON® Wireless IP Camera
Filename: Fill in a name for the uploaded image file. This name is different from the alarm image. You
cannot change the name of the alarm image.
Click Submit, then click Test. The following screen will appear if successful:
The following errors may occur:
1) Cannot connect to the server. Check that the FTP server is correct.
2) Network error; try later.
3) Server error
4) Incorrect username or password. Check username and password.
5) Cannot access the folder. Verify the folder exists and your account is authorized.
6) Error in PASV mode. Verify the server supports PASV mode.
7) Error in PORT mode. PASV mode should be selected if the device is behind a NAT.
8) Cannot upload file. Verify your account. Check parameters. The saved image name will be similar to
00606E8C1930(sarah)_0_20100728114350_25.jpg; check that your FTP server supports this file name
format.

3.13 Alarm Service Settings

If you enable Motion Detect Armed, you will receive email alerts and still images when motion is
detected.
insteon.com
30