LG WD-1409RD Service Manual page 43

CABINET COVER
1 The plate assembly(Top) is disassembled.
2 Pull out the drawer and unscrew 2 screws.
3 Lift the side the Control Panel Assembly and
pull it out
1 Two screws is unscrewed.
2 Push out PANEL ASSEMBLY, CONTROL after
Push the hook(
3 Unscrew the screws from the lower cover.
2 The cabinet cover clamp is removed by
special jig for service and the gasket is
released.
3 Two screws are unscrewed.
4 Unscrew all the screws on the upper and
lower sides of the CABINET COVER.
42
, ) below.
2
1