HP StorageWorks P4000 G2 User Manual page 60

Step 1
If you have not already run the Phase 1 script factory-setup-adlds.cmd, do so now. The script is located
in the c:\hpnas\components\postinstaller\adlds folder.
Step 2
On the Windows system, in the C:\hpnas\components\ADLDS folder, create a file named
passwdfile containing:
root:x:0:0:root:/root:/bin/bash
user1:x:2701:5700:A sample user:/home/user1:/bin/sh
Create a file named groupfile containing:
rootgroup:x:0:
allusers:x:5700:
On the UNIX system, edit the /etc/passwd file to have an account for user1 with a user ID of 2701
and a group ID of 5700. Edit the /etc/group file to have a group account for allusers with a group
ID of 5700. On the UNIX side you do not need to create a group named rootgroup because the
existing group named root has a group ID of 0.
NOTE:
If you are taking the /etc/group file from the UNIX system and preparing it as input for
nfs-adlds-config.js, you must rename the root group to something else such as rootgroup . This solves
the conflict with the root user. As described earlier, Windows does not allow the same name to be
used for both a user and a group.
Step 3
Execute the phase 2 script c:\hpnas\components\ADLDS in a command window as follows:
nfs-adlds-config.js /passwd:passwdfile /group:groupfile /ldf:out.ldf /
usercmd:generateusers.cmd /userpassword:c0mpleX! /execute /log:log.txt
Examine log.txt to ensure that there are no errors. Error messages that read System error 1379: The
specified local group already exists can be ignored.
Follow the steps in
and group accounts are created and expected NFS mappings are established.
Step 4
Create a folder C:\NfsTest. Right-click the folder and select Properties. Click the NFS Sharing tab and
then click the Manage NFS Sharing button. Check the Share this folder check box. In the Share name
field, type NfsTest. Clear the Enable unmapped user access check box.
60 Administration tools
"Verifying script execution on page 57 to verify that appropriate Windows user