Clarke ATC12V User Manual

12v battery charger

Download this manual

Enlarged version

12V BATTERY CHARGER

Model No. ATC12V

Part No. 6266010

Thank you for purchasing this CLARKE 12 volt Battery Charger, ideally used for trickle

charging 12 volt lead acid batteries.

Please read this leaflet thoroughly before use, and follow all instructions given. This will not

only provide protection for yourself and that of others around you, but will also ensure that

the Battery Charger will give you long and satisfactory service.

GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period of 12 months

from the date of purchase. Please keep your receipt as proof of purchase. This guarantee

is invalid if the product is found to have been abused or tampered with in any way, or not

used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be

returned to us without prior permission.

This guarantee does not effect your statutory rights.

1201

Need help?

Do you have a question about the ATC12V and is the answer not in the manual?

Page 1 Model No. ATC12V 1201 Part No. 6266010 Thank you for purchasing this CLARKE 12 volt Battery Charger, ideally used for trickle charging 12 volt lead acid batteries. Please read this leaflet thoroughly before use, and follow all instructions given. This will not only provide protection for yourself and that of others around you, but will also ensure that the Battery Charger will give you long and satisfactory service.
Page 2: Safety Precautions
The maximum charge rate is 800mA. When • Do not operate charger if any of the cables are damaged. Consult your Clarke dealer the charging rate is reduced to less than approximately 200mA, charging ceases and the for repair or replacement of the parts.