CHAPTER 2 - USING THE CONTROLS AND SETTING THE FUNCTIONS
2.1 SETTING THE CLOCK
•
The first time the appliance is connected to the household electricity supply or after it has been without
power for some time, the 'delo' welcome message is displayed for 2-3 seconds, followed by four dashes
(--:--). To set the time, proceed as follows:
•
If you want to change the time set subsequently, repeat the setting procedure described above.
•
The current time can be displayed even after having set a function by pressing the TIME ADJUST buttons
(6) together for at least 1 second.
(The time will be displayed for 2 seconds).
•
To set longer times, hold the "+" or "-" button down (not together).
34
1
Press the TIME ADJUST but-
tons (6) together for at least 2
seconds.
(The hour flashes).
2
Press the TIME ADJUST but-
tons (6) to set the required
hour.
3
Press the START button (8).
(The minutes flash).
4
Press the TIME ADJUST but-
tons (6) to set the required
minutes.
5
Press the START button (8).
(The set time is displayed).