Chime And Status Features; Voice Chime; Voice Status - First Alert FA560VKP User Manual

Chime and Status Features

Voice Chime

You can set the keypad(s) to announce faulted (opened) entry/exit or perimeter zones whenever
the control panel's Chime mode is on by turning on the Voice Chime mode.
To turn Voice Chime On/Off: Press the

Voice Status

You can use the STATUS [ ] key to announce system status and display any system and/or zone
faults (if they exist) by first turning on the Voice Chime mode (see above). When Voice Chime
mode is on, pressing the STATUS [ ] key displays and announces current system status and
zone descriptors (programmed by your installer) of faulted zones. If zone descriptors are not
programmed, the respective faulted zone numbers are announced.
To Announce Status: Press the
To Announce Faults: Press the
¬.8* l
K0022-2UG 8/02
#
FUNCTION
When on, any faulted zone(s) causes a voice status annunciation, chime,
and display. When off, the sounder will still provide chime when the
control's Chime mode is on.
#
+
FUNCTION
must be "on"; see above.)
The respective system status is announced (e.g. "Disarmed Ready to
Arm" or "Disarmed Not Ready to Arm").
Note : Status cannot be announced during the Exit Delay period.
READY
key a second time within 10 seconds of the first
STATUS
press.
Up to 3 faulted zones are announced with their zone descriptors, if
programmed. If zone descriptors are not programmed, the respective
zone numbers are announced.
0 2
AWAY
+ +
VOICE VOLUME
0
READY
+ keys once.
STATUS
VOICE
149 Eileen Way, Syosset, N.Y. 11791
Copyright 2001 PITTWAY CORPORATION
R
+ 4 keys.
MAX
(Voice Chime mode