SATO HT200e Configuration Manual page 71

Programming
01 ITEM NAME
[..........]
HT200
Enter a descriptive name for the
field. Up to 10 characters may
NUM ALP
be entered.
1. Use the Numeric keypad for numerics
2. Press SHFT once to enter lower case
alpha symbols. An ALP designator will
appear in the upper right corner
3. Press SHFT again to enter UPPER case
alpha characters;use SET to toggle to NUM
4. In alpha mode, pressing SPC1/SPC2
keys will scroll through special characters
5. To clear the input and start over, press
the PGUP and ENTR
6. To accept the input, press the ENTR key
www.satoamerica.com
e
Register Mode