TransTel Communications Blue Tooth Phone User Manual

Blue tooth phone

Advertisement

Quick Links

TO MAKE INTERCOM / OUTGOING CALLS

To make an intercom call or an outgoing call:
Manual Mode
1.
Press the [Answer] button on the headset.
2.
Press Extension Number or dial External number
3.
To End Call press [Answer] button on headset
Auto Mode
Press Extension number or dial External number
To End Call press SPK button on DK2 Phone

GENERAL OPERATION

To Adjust Speaker Volume during a Call
You can adjust the speaker volume during a call by
pressing the volume control buttons on the side of the Ear
and or the volume control keys on the DK6 phone
according to your preference.
Operation Range
The DK6 Blue Tooth Interface is a very low power radio
communication device. The radio communication range
between the DK6 and the Headset is approximately 10
meters. Please keep both units within this range for best
communication performance.

EAR PIECE SETUP

Most headsets will allow you to wear the headset on your
right or left per your preference. Please consult your Blue
Tooth Headset user guide for the setup required.

MAINTAINANCE

As high temperature will shorten the battery life, please do
not leave your Headset
in an environment
temperatures over 100ºF or in direct sunlight.
Keep your Headset away from moisture.
To clean, use soft cloth with mild liquid soap to clean the
exterior of your Cordless Headset and phone. DO NOT
use abrasive chemical detergent or material to clean the
Headset.
DO not attempt to pry open the cover of your Cordless
Headset or change the batteries. Seek assistance from
an AUTHORIZED dealer near you.
TRANSTEL DESIGNS AND MANUFACTURES A SPECIAL
INTERFACE CARD IN COMPLIANCE WITH THE
BLUETOOTH 2.0 SPECIFICATION. THIS IS COMPATIBLE
WITH HEADSETS AVAILABLE THROUGH YOUR LOCAL
DEALER OR GENERALLY AVAILABLE AT MANY RETAIL
OUTLETS. WE RECOMMEND USING HEADSETS WE
HAVE TESTED FOR COMPATABILITY AS LISTED WITHIN
THIS USER GUIDE. WARRANTY AND PERFORMANCE
OF THE HEADSET YOU CHOOSE SHALL BE THAT OF
THE RESPECTIVE MANUFACTURER.

HEADSET SPECIFICATIONS

Frequency
Security
Technology Type
Auto channel hopping
Working range
Talk time
with
Blue Tooth Version
2.400~2.4835GHz
128 Bit
Blue Tooth
Yes
Up to 10 meters
4 hours (headset dependant)
2.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Blue Tooth Phone and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for TransTel Communications Blue Tooth Phone

  • Page 1 Press the [Answer] button on the headset. Press Extension Number or dial External number To End Call press [Answer] button on headset TRANSTEL DESIGNS AND MANUFACTURES A SPECIAL Auto Mode Press Extension number or dial External number INTERFACE CARD IN COMPLIANCE WITH THE To End Call press SPK button on DK2 Phone BLUETOOTH 2.0 SPECIFICATION.
  • Page 2 BLUE TOOTH HEADSETS CONNECTION TO PHONE TO ANSWER INCOMING CALLS The DK6 Phone Blue Tooth interface will integrate with Manual Mode No physical connection to the DK6 phone is required. many brands of headset, we have tested and recommend To answer incoming call: the following headsets When DK6 phones rings the Blue Tooth Headset will beep in your ear...

Table of Contents