Culligan Good Water Machine Owner's Manual page 19

Pressure
Temperature
Total Dissolved Solids (TDS)
pH
Chlorine
2
Chloramine
Turbidity
Hardness
3
Iron
Bacterial Quality
1 See the Technical Manual for all applications where TDS exceeds 1000 ppm (1000 mg/
L). A booster pump is strongly recommended.
2 The reverse osmosis membrane filter used in this system may be damaged by chlorine.
This system includes activated carbon which protects this element by reducing chlorine.
Influent chlorine should not exceed 3 mg/L.
3 A softener is strongly recommended for water over 10 gpg.
Application Guidelines
The Good Water Machine is designed for use on potable water supplies meeting the
guidelines outlined in Table 1. The system should be installed on your home's cold water
line. The flushing stream should discharge through an approved siphon break as illustrated in
Figure 1. Installation of this system must comply with state and local laws and regulations.
Table 1 – Influent Water Characteristic
40 - 120 psi (280 - 827 kPa)
33 - 100°F (1 - 38°C)
0 - 2500 ppm ( 0 - 2500 mg/L)
1
5 - 10
0 - 3 ppm ( 0 - 3 mg/L)
0 - 3 ppm ( 0 - 3 mg/L)
0 - 10 NTU
0 - 10 gpg
0 - 1 ppm (0 - 1 mg/L)
Potable
Performance
Data Sheet
(cont.)
17