Security System Operation; Disarming Operation; Silent Arming/Disarming; Auto Rearm - Black Widow REMOTE START SECURITY SYSTEM Owner's Manual

Security System Operation

ARMING OPERATION
To arm the system press transmitter button 1:
• The siren will chirp once. -
• The parking lights will flash once.
• The doors will lock*.
• The L.E.D. will turn solid for 10 seconds
then start flashing slowly, the system - is
now armed.
While the system is armed the alarm will
trigger if
• A door is opened.
• The hood/trunk is opened*.
• The shock sensor detects an impact to the
vehicle.
When the alarm is triggered the siren will sound, the
parking lights will flash, and the horn will honk*. If the
alarm is triggered while the remote start is engaged,
the remote start will immediately shut down.

PASSIVE ARMING

The passive arming feature allows the system to
arm automatically without user intervention.
This programmable feature may be enabled during
installation.
To arm the system passively:
1.Turn the ignition key off.‡
2.Exit the vehicle and close all doors.
• The LED will start flashing rapidly to indicate
that the system is preparing to arm. (The
system can be armed at any time by pressing
transmitter button 1.)
• The siren will chirp 30 seconds after
the last door is closed to indicate the
system is now armed.
• The doors will lock.†*
‡
The ignition must have been on for at least 10 seconds prior to
exiting the vehicle or Passive Arming will be bypassed.
†
If the Passive Locking feature was enabled during installation.

DISARMING OPERATION

To disarm the system press transmitter button 2.
• The siren will chirp twice.¥
• The parking lights will flash twice.¥
• The doors will unlock.†*
• The dome light will turn. on for 30
seconds.*
¥
If the alarm was triggered while away, the system will respond
with 3 chirps and 3 parking light flashes.
†
If the Passenger Unlock Feature is enabled, pressing the unlock
button will unlock only the driver's door. Pressing the unlock
button again unlocks all doors.
TAMPER ALERT
If the alarm was triggered while away from the vehicle,the
siren will chirp 3 times on disarming for tamper indication.
After disarming the alarm, enter vehicle and turn ignition
on. The LED will flash the zone that was triggered 5
times (see LED chart).

AUTO REARM

The Auto Rearm feature allows the system to
automatically re-arm itself in the event the
system is disarmed and ignition is not turned on
within 30 seconds.
NOTE: This programmable feature may be disabled
during installation. The Passive Arming feature and Auto
Rearm feature are related In order to disable the Auto
Rearm feature, the Passive Arming feature must also be
disabled during installation. This feature will not work on
vehicles with the illuminated entry feature enabled

SILENT ARMING/DISARMING

Press transmitter button 5 (the Shift Button)
then the Arm or Disarm button for one-time
silent operation.
*
Optional Feature
2