Black Widow BW 4100 Owner's Manual

V E H I C L E S E C U R I T Y
Features available on your
security system:
Status indicator (red LED)
Valet / override switch
Multi-tone siren
Starter disable
Dual stage impact detector
Remote panic
Remote chirp mute
Remote sensor/trigger bypass
Passive or active arming
Remote keyless entry (Optional)
Remote trunk or hatch release (Optional)
Remote auto start (Optional)
Power window roll up (Optional)
Flashing parking lights
Illuminated entry
Hood and trunk protection
Note: Some features may require additional
parts and labor, and may not be appropriate for
certain vehicles. Consult your authorized dealer.
O W N E R ' S M A N U A L

System Operation

ARMING OPERATION:
Active Arming-To activate the
alarm, simply press the lock
button on your remote control,
you will hear one chirp from
your siren and your parking
lights will flash one time
(optional). Your doors will lock (optional),
and the L.E.D. will turn solid for 10 seconds
then it will start flashing slowly, the system is
now armed.
Passive Arming- If your system was installed
to arm passively, simply turn off your ignition
key and exit the vehicle, the system will arm
30 seconds after the last door is closed. After
you shut off the ignition, the LED will start
flashing rapidly to let you know that the system
is in the Pre Arm state.You can always arm the
system at any time by pressing the lock button
on the remote.
1
Lock LED Unlock
Trunk Asterisk
4- Button
Transmitter
Press