Black Widow BW 3000 Owner's Manual

Hide thumbs Also See for BW 3000:

Download this manual See also: Installation Manual

B W 3 0 0 0

Standard Features

The following features are standard with your

BW 3000 Security System:

2-two button, 3 channel remote controls

Status indicator (red LED)

Valet / override switch

Multi-tone siren (120db)

Built-in starter interrupt

Dual stage impact detector

Remote panic

Remote chirp mute

Remote sensor bypass

Passive or active arming

Remote keyless entry

Ignition triggered door locks programmable

O W N E R S M A N U A L

Optional Features that you may add to

your BW 3000 (Consult with your technician)

Remote trunk pop

Remote auto start

Power window roll up

Flashing parking lights

Back up battery

Additional Sensors: Glass break, Microwave

Hood and trunk protection

Illuminated entry

Note: Some features and options may require

additional parts and labor, and may not be appro-

priate for certain vehicles.

Page 1 B W 3 0 0 0 O W N E R S M A N U A L Standard Features Optional Features that you may add to The following features are standard with your your BW 3000 (Consult with your technician) BW 3000 Security System: Remote trunk pop 2-two button, 3 channel remote controls...
Page 2: System Operation
parking lights will flash twice PRESS Button 1 LED Button 2 (optional), then stay on for 30 seconds or until you either turn the ignition on or rearm the system (optional car location feature).The LED will stop flashing, the doors will unlock , your system is disarmed.
Page 3 vehicle. The siren will sound, insert your igni- ENTRY VIOLATION MEMORY: tion key and turn the ignition to the ON posi- In the event that your BW 3000 system is tion. Then press the Valet/Override Switch, triggered and runs an entire cycle, when you the system will be overridden and allow you return to disarm it instead of the usual 2 to start the vehicle.The system will automati-...
Page 4 AUTO REARM FEATURE: LED STATUS INDICATORS If you Off= System off in Active mode Hold would like Slow Flashing= System Armed your sys- Rapid Flashing= Passive Pre Arm State tem to Rapid Flashing (after disarm)= System auto was triggered while away. rearm (if system is remotely disarmed) and a On Solid=In Valet Mode.