Black Widow BW 2800 Owner's Manual

V E H I C L E S E C U R I T Y
Button 1 LED Button 2
2- Button
Transmitter
Features available on your
security system:
Status indicator (red LED)
Valet / override switch
Multi-tone siren
Starter disable
Dual stage impact detector
Remote panic
Remote chirp mute
Remote sensor/trigger bypass
Passive or active arming
Remote keyless entry
Remote trunk or hatch release
Remote auto start
Power window roll up
Flashing parking lights
Illuminated entry
Hood and trunk protection
Note: Some features may require additional
parts and labor, and may not be appropriate for
certain vehicles. Consult your authorized dealer.
Button 2 LED Button 3
•• •
••
Button 1
•
3- Button
Transmitter
O W N E R ' S M A N U A L

System Operation

ARMING OPERATION:

Active Arming-To activate the
alarm, simply press button #1
on your remote control, you
will hear one chirp from your
siren and your parking lights
will flash one time (optional).
Your doors will lock (optional),
and the L.E.D. will turn solid for
10 seconds then it will start
flashing slowly, the system is
now armed.
Passive Arming- If your system was installed
to arm passively, simply turn off your ignition
key and exit the vehicle, the system will arm
30 seconds after the last door is closed. After
you shut off the ignition, the LED will start
flashing rapidly to let you know that the sys-
tem is in the Pre Arm state.You can always
arm the system at any time by pressing button
#1 on the remote.

DISARMING OPERATION:

To deactivate the alarm, press
button #1 on your remote, the
siren will chirp twice and your
parking lights will flash twice
(optional), then stay on for 30
seconds or until you either
turn the ignition on or rearm
the system (optional car loca-
tion feature).The LED will stop
flashing, the doors will unlock
1
Press
or
Press
• • •
• •
•
Press
or
Press
• •
••
•
•