Table of Contents
Advertisement
Quick Links
REMOTE START SECURITY SYSTEM
Standard Features
The System has the following standard features:
• 5-button remote transmitter
• Status indicator (LED)
• Valet/Service mode switch
• Remote Start capabilities
• Extended Range Receiver
• Multi-tone siren (126dB)
• Dual stage impact detector
• Remote panic
• Valet mode
• Remote chirp delete
• Remote sensor bypass
• Passive or active arming
• Stop & Go Feature
• Auto Cold Start
• Flashing parking lights
• Auto Rearm
• Passive/Active Arming
Optional Features
This System has many optional features that may
require additional parts and/or labor. Please contact
your dealer for more details.
• Remote keyless entry (Door lock/unlock)
• Illuminated entry
• LCD FM 2-way Remote
• Hood & trunk protection
• Horn honk
• Trunk/hatch release
• Window roll-up
• Back up battery
• Additional sensors: glass breakage/microwave
OWNERS MANUAL
Note: Some features may not be appropriate for
certain vehicles. Automatic transmission and
electronic fuel injection are required. on vehicles for
use with this system.
REMOTE TRANSMITTER FUNCTIONS
Button 1
Button 3
5-Button
Transmitter
Button I Arms the system and locks the
doors*. Button I also activates the Panic
feature.
Button 2 Disarms the system and unlocks the
doors*.
Button 3 Activates the optional Trunk Release
feature*.
Button 4 Activates the Remote Start Feature.
Button 5 Auxiliary Shift Key.
Buttons 5 then 4 Activates the 2nd auxiliary
function.
* Optional Feature
1
Button 2
Button 5
Button 4
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Black Widow REMOTE START SECURITY SYSTEM
Summary of Contents for Black Widow REMOTE START SECURITY SYSTEM
- Page 1 REMOTE START SECURITY SYSTEM OWNERS MANUAL Standard Features Note: Some features may not be appropriate for certain vehicles. Automatic transmission and The System has the following standard features: electronic fuel injection are required. on vehicles for • 5-button remote transmitter use with this system.
-
Page 2: Security System Operation
Security System Operation † If the Passive Locking feature was enabled during installation. DISARMING OPERATION ARMING OPERATION To disarm the system press transmitter button 2. To arm the system press transmitter button 1: • The siren will chirp twice.¥ • The siren will chirp once. - •... - Page 3 CHIRP DELETE the security system will be disabled. However, the For full time silent operation, the ARM/ DISARM optional keyless entry and trunk release and chirps can be permanently disabled.This feature must remote start features will still function if be programmed during installation. installed.
-
Page 4: Remote Start Operation
system is disarmed and rearmed. the remote transmitter. Enter vehicle, turn ignition key to the on position (Note: Do not turn the key all OPTIONAL SECURE the way to the start position as you may damage the OVERRIDE CODE starter). If your system was programmed to override with a Once the ignition key is turned to the on position, personal override code-pressing the override switch... -
Page 5: Stop And Go
This System can “learn” a maximum of 4 remote transmitters.To add a transmitter or replace 2. Remove the key from the ignition. lost/stolen transmitters, please consult with an authorized Black Widow Dealer. 3. Exit the vehicle and lock the doors manually or Optional Feature using transmitter button 1*. -
Page 6: Status Indicator (Led) Functions
SYSTEM REFERENCE INDICATORS STATUS INDICATOR (LED) FUNCTIONS PARKING LIGHTS FUNCTIONS On Solid =Valet Mode On Solid =Vehicle Remote Starting Slow Flash System Armed Flash I x =System armed Rapid Flash Passive Arming TAMPER ALERT LED FUNCTIONS Flash 2x = System disarmed I flash ‘...
Need help?
Do you have a question about the REMOTE START SECURITY SYSTEM and is the answer not in the manual?
Questions and answers