Table of Contents
Advertisement
A
X
4
S
-
U
/
A
X
A
X
4
S
-
U
/
A
X
Support Removable Disks Under BIOS as Fixed Disks
This option allows you to control which removable-media drives are supported by the SCSI controller BIOS. This is only valid
when the SCSI controller BIOS is enabled. The default setting is Boot Only. The following choices are available:
Boot Only - Only the removable-media drive designated as the boot device is treated as a hard disk drive.
All Disks - All removable-media drives supported by the BIOS are treated as hard disk drives.
Disabled - No removable-media drives are treated as hard disk drives. In this case, software drivers are needed because
the drives are not controlled by BIOS.
Support for removable-media drives means that the SCSI controller BIOS allows use of a removable-media drive as if it is a
hard disk drive. It does not mean that you can remove the disk media during operation.
If a removable-media SCSI device is controlled by the
SCSI controller BIOS, do not remove the media while
the drive is powered-on or you may lose data!
BIOS Support for Bootable CD-ROM
When enabled, this option allows you to use a bootable CD-ROM device to directly load an operating system. The default
setting is Enabled.
BIOS Support for Int13 Extensions
This option allows access to attached SCSI devices through BIOS Int13 functions. The default setting is Enabled.
4
S
P
l
u
s
-
U
4
S
P
l
u
s
-
U
O
n
l
i
n
e
O
n
l
i
n
e
114
M
a
n
u
a
l
M
a
n
u
a
l
Advertisement
Table of Contents
