Audio Window - Cisco CIVS-IPC-2600 User Manual

Chapter 3 Configuring and Managing the IP Camera

Audio Window

The Audio window provides options for enabling and configuring audio that is transmitted to and from
the IP camera. You can configure audio for these devices:
•
•
•
To display the Audio window, access the configuration windows as described in the
Camera Windows" section on page
If you change any options in the Audio window, you must click Save to save the changes. To discard the
changes, click Cancel before clicking Save. These buttons appear at the bottom of the window. You may
need to scroll down to see them.
Table 3-10
Table 3-10
Option
Enable Audio
OL-24127-02
Internal microphone—The IP camera includes an internal microphone that can capture audio at the
camera location. This audio is sent to the PC that you use to view video from the IP camera. You
can listen to the audio when viewing video in the Home window.
External microphone—You can connect an optional external microphone (available from
third-parties) to the IP camera. This audio is sent to the PC that you use to view video from the IP
camera. You can listen to the audio when viewing video in the Home window. Connecting an
external microphone disables the internal microphone.
External speaker— You can connect an optional external speaker (available from third-parties) to
the IP camera. This speaker plays audio that is captured by the microphone of the PC that you use
to view video from the IP camera. The PC can capture and send this audio only when the Home
window is open.
describes the options in the Audio window.
Audio Window Options
Description
Check this check box to enable audio from the IP camera, and choose one of
these options:
•
•
•
•
Note
2-6, click Audio/Video, then click Audio.
Simplex - Listen Only—Enables a simplex connection that allows you
to receive audio from the IP camera but not transmit audio to the IP
camera
Simplex - Talk Only—Enables a simplex connection that allows you to
transmit audio to the IP camera but not receive audio from the IP camera
Half Duplex - Talk or Listen—Enables a half duplex connection that
lets you receive audio from and transmit audio to the IP camera, but not
simultaneously
Full Duplex - Talk and Listen—Enables a full duplex connection that
lets you simultaneously receive audio from and transmit audio to the IP
camera
When you enable transmitting audio to the IP camera, the internal
microphone on the IP camera or an external microphone that is
attached to the IP camera is muted by default. To unmute the
microphone, use the Microphone On toggle button in the Home
window. For detailed information, see the
section on page 4-3.
Cisco Video Surveillance 2600 IP Camera User Guide
Audio/Video Windows
"Accessing the IP
"Home Window Controls"
3-23