Rebooting The Gateway; Restoring Factory Default Settings - ActionTec V1000H User Manual

Rebooting the Gateway

To reboot the Gateway:
Reboot from the menu on the left side of any Advanced Setup screen.
1. Click
The Reboot Modem screen appears.
Reboot to reboot the Gateway. This may take up to one minute.
2. Click
To reenter the Gateway's firmware after restarting the Gateway, click the web
browser's Refresh button.

Restoring Factory Default Settings

If the Gateway's factory default settings need to be restored (to build a new net-
Restore Defaults in any Advanced Setup screen. The Restore Defaults
1. Click
screen appears.
VDSL2/GigE Wireless 11n Gateway
40