Set User Password; Load Optimized Defaults; Save And Exit Setup - Acer AcerPower F6 Service Manual

Set User Password

This item helps you set or change a password. Press <Esc> to return to the main menu setting
page.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
User Password : Not Installed
Change User Password
User Password (Not Installed)
This item indicates whether a supervisor password has been set. If the password has been
installed, installed will display. If not, Not Installed will come out.
Change User Password (Press Enter)
You can select this option and press <Enter> to access the sub menu. You can use the submenu to
change the user password.

Load Optimized Defaults

This option will open a dialog box that lets you install stability-oriented defaults for all
appropriate items in the Setup Utility. Select [OK] then press <Enter> to install the defaults. Select
[Cancel] then press <Enter> to not install the defaults.

Save and Exit Setup

You can highlight this item and press <Enter> to save the changes that you have made in the
Setup Utility and exit the Setup Utility. When the Save and Exit dialog box appears, press [OK] to
save and exit, or press [Cancel] to return to the main menu.
Chapter 2
User Password
Enter : Select
: Move
F1:General Help
Press Enter
F10: Save & Exit
+/-/: Value
F9: Optimized Defaults
Help item
Install or Change the
password.
ESC: Exit
41