Installation Of A Mainboard - Sharkoon T9 Manual

4. Installation of a mainboard

1. Open the case by loosening the thumb screws on the case's back side and removing the left
side panel. Lay down the case sidewise on an even surface.
2. The mainboard's mounting panel inside the case provides various drillings to fix the
stand-offs (fig. 1).
fig. 1
The mainboard contains special screw openings (fig. 2).
fig. 2
Place the mainboard to the mounting panel. A stand-off must be screwed into every
drilling of the mounting panel visible through the mainboard's screw openings.
T9