Specifications - Toshiba X870 User Manual

If the battery pack becomes too hot while it is being charged, the charge
will stop and the DC IN/Battery indicator will go out. When the battery
pack's temperature falls to a normal range, charging will resume - this
process will occur regardless of whether the computer's power is on or off.
Power indicator
Check the Power indicator to determine the power status of the computer -
the following indicator conditions should be noted:
Red
Flashing amber
No light

Specifications

This section summarizes the computer's technical specifications.
Physical Dimensions
Size
Environmental Requirements
Conditions
Operating
Non-operating
Wet-bulb temperature 29°C maximum
Conditions
User's Manual
Indicates power is being supplied to the
computer and the computer is turned on.
Indicates that the computer is in Sleep Mode and
that there is sufficient power available (AC
adaptor or battery) to maintain this condition. In
Sleep Mode, this indicator will turn on for one
second and off for two seconds.
Under any other conditions, the indicator does
not light.
Approximately 413.6 (w) x 272.5 (d) x 36.5/43.5 (h)
millimeters
(not including parts that extend beyond the main body).
The physical dimensions may vary depending on the
model you purchased.
Ambient temperature
5°C (41°F) to 35°C
(95°F)
-20°C (-4°F) to 60°C
(140°F)
Altitude (from sea
level)
Relative humidity
20% to 80%
(noncondensing)
10% to 90%
(noncondensing)
3-16