Toshiba X870 User Manual page 129

SATA Interface setting
This feature allows you to set SATA interface setting.
Performance
Battery life
LAN
Wake-up on LAN
This feature lets the computer's power be turned on from shutdown when it
receives a wake-up packet (Magic packet) from the LAN.
Power will be automatically turned on when a signal is received from an
administrator's computer which is connected via a network.
The following settings can be changed when the Built-in LAN is Enabled.
Connect the AC adaptor when using the Wake-up on LAN function. The
battery retention time will be shorter than the times listed in this manual
when this function is enabled.
Enabled
Disabled
Built-in LAN
This feature enables or disables the Built-in LAN.
Enabled
Disabled
ODD Tray Lock
This tab allows you to set the condition for ODD tray lock.
Enabled
Disabled
User's Manual
The Wake-up on LAN function consumes power even when the
system is off. Leave the AC adaptor connected while using this
feature.
Regarding Wake-up on LAN from sleep or hibernation, you must
check the "Allow the device to wake the computer" check box within
the LAN Device properties. (This feature does not effect the Wake-up
on LAN from sleep or hibernation.)
Let HDD/SSD work with maximum performance.
Let HDD/SSD work with battery life mode. If this
setting is selected, this caused performance
down.
Enables Wake-up on LAN from shutdown.
Disables Wake-up on LAN from shutdown.
Enables Built-in LAN functions.
Disables Built-in LAN functions.
The ODD tray automatically locks if vibration or
shock is detected when your computer is
powered by battery pack.
Disables ODD tray lock function.
5-15