Toshiba X870 User Manual page 127

Boot
This tab allows you to modify the boot settings.
Boot Priority Options
This option allows you to set the priority for booting the computer. Click the
Up and Down buttons to adjust the priority.
To change the boot drive, follow the steps below.
1.
2.
Boot speed
This option allows you to select system boot-up speed.
Fast
Normal
Panel Open - Power On
This option allows you to change the Panel Open - Power On setting.
Enabled
Disabled
The Panel Open - Power On feature is supported with some models.
User's Manual
Hold down F12 and boot the computer. Release the F12 key one
second after the computer is power on.
Use the up and down cursor keys to select the boot device you want
and press ENTER.
If your computer does not load the Boot menu, please refer to the
Troubleshooting section.
If a Supervisor Password has been set, manual boot device selection
functions may be restricted.
The boot device selection methods described above will not change
the boot priority settings that have been configured in TOSHIBA
System Settings. In addition, if you press a key other than one of
those listed, or if the selected device is not installed, the system will
continue to boot according to the current and available settings in
TOSHIBA System Settings.
Reduces system boot-up time. System can boot
only from the built-in HDD and only internal LCD
and keyboard are supported during the boot
process.
System boots up at normal speed.
Enables the Panel Open - Power On function.
When you open the display panel while your
computer is turned off, the system will boot up
automatically.
Disables the Panel Open - Power On function.
5-13