Sealed-Beam Headlamp - Chevrolet Express Owner's Manual

5. Disconnect the electrical
connector.
6. Turn the bulb counterclockwise
one-quarter turn to remove it
from the headlamp assembly.
7. Install the new bulb into the
headlamp assembly and connect
the electrical connector.
8. Reverse the steps to reinstall the
headlamp assembly.
To prevent headlamp vibration
and shortened bulb life, be sure
to insert the headlamp assembly
tabs in the slots at the lower
portion of the housing.
1. Headlamp retainer screws
2. Headlamp retainer
3. Sealed-beam headlamp bulb
To replace one of these bulbs:
1. Remove the four screws (1) from
the headlamp retainer (2).
Pull the retainer (2) out and set it
aside.
2. Pull the bulb (3) forward to gain
access to the electrical
connector.
3. Disconnect the electrical
connector (2) and remove the
headlamp bulb (1).
4. Reverse Steps 1 3 to reinstall
the headlamp.