Turn assembly upside down.
5
Insert axle rod into wheel,
Insert leg extenders into right legs.
1" Hitch Pin
Qty. 1
Axle Spacer
Qty: 2
Axle Washer
Qty: 1
"Cone" side of wheel against leg
Stand cart upright.
6
This step requires two people to lift and position
grill head onto cart.
Carefully lower the grill head onto the cart. Make sure
the regulator hose is hanging outside the cart. Attach
with
1/4-20x1/2" machine screws
1/4-20x1/2"
Machine Screw
Qty: 4
axle spacer,
legs and other axle
Wheel
Axle Rod
Axle Spacer
.
spacer and wheel.
Attach with
Grill Head
8mm flat washer
and hitch pin.
Hitch Pin
Axle Washer
19