Table of Contents
Advertisement
Available languages
Available languages
Installation
Oven Assembly
OVEN SUPPORTS AND CASTERS
1. Bolt the supports to the oven with 3/8-16 hex
head bolts.
NOTE: Install the locking casters on the front
of the oven.
2. Carefully place the oven onto casters. Have
several persons lift the oven off the pallet and
set it onto the casters.
3. Engage the brakes on the front casters.
4. Remove the crating supports from the rear of
the oven.
Figure 3
RETURN AIR DIVERTERS
1. Slide the left and right air diverters into the bot-
tom of the baking chamber. See Figure 4 for
proper orientation. The outside edges of the
diverters should be 3" (11.8 cm) from the edge
of the oven.
Crating
Support
6
3" (11.8 cm)
Figure 4
Front of
Oven
Advertisement
Table of Contents
