Tv Stand Installation - RCA 42PA30RQ User Manual

TV Stand Installation

TV 42PA30RQ is packaged with the TV stand separated from the cabinet. To setup the TV table stand, please carry out the
installation according to the instructions below.
Step One
Place the TV faced down on a soft cloth or cushion to prevent the PDP panel from being damaged.
The PDP panel can be scratched easily, so please:
1. Choose an absolutely flat surface to place the TV on. Use soft cloth or cushion to face the TV panel. Do not put TV on the
table directly.
2. Always unplug the AC cord first when installing/removing the stand.
Step Two
Take out the stand and insert the stand into the installing slot in the lower part of the TV, then put the stand to relevant position of
the TV set until all the holes match each other completely.
Step Three
Insert six M4 machine screws (all same in size) and tighten them.
Please refer to the picture given below:
10
Pedestal Screws Quantity
M4 x 12mm 6pcs
Part #
RS01TM412H