Programming The Default Parameters; At This Point Press The Right Buttons Till You Hear Other Two Beeps (Fig - Electrolux Air-O-Speed 593800300 Service Manual

Electrolux Professional S.p.A.
Ovens Platform Customer Support
Technical Training & Service

1. Programming the default parameters

Switch on the oven. (Fig.1)
Just after the switching on, the start-up page will appear.
At this point, press the external service buttons (fig.2) till you hear two beeps.
1 2
Fig. 3

At this point press the right buttons till you hear other two beeps (fig. 3).

Press then the left service buttons and wait for other two beeps (fig. 4).
At this point release the left buttons keeping pressed the middle one (fig. 5) till you hear 2 beeps.
Release the middle button and wait until the standard page for selecting cycles in "Manual mode" appear
and the cavity lights are on.
File: AOSpeed service manual (ENG).001
Fig.1
1 2
©Copyright 2002 by Electrolux Professional
AOSpeed OVENS
Service Manual
(593800300 - ENG)
1 2
Fig. 4
Fig. 2
1 2
Fig. 5
P.3/20