Setup And Operation; Inserting The Remote Control Batteries - InFocus IN134UST User Manual

IN134UST/IN136UST User's Manual

Inserting the Remote Control Batteries

1.
Remove the battery compartment
cover by sliding the cover in the
direction of the arrow (A). Pull out the
cover (B).
2.
Insert the battery with the positive
side facing up.
3.
Replace the cover.
Caution:
1. Only use a 3V lithium battery (CR2025).
2. Dispose of used batteries according to local ordinance regulations.
3. Remove the batteries when not using the projector for prolonged periods.
Note:
Batteries are not normally included with InFocus projectors.
S
ETUP AND
— 10 —
O
PERATION