Pre-Tuning The Vcr Tuner - Hitachi VTUX-6450A Owner's Manual

PRE-TUNING THE VCR TUNER

PRE-TUNING THE VCR TUNER
Note: An antenna or cable must be connected to the VCR before you begin this operation.
Presetting the received channels without using a cable box (Hookups
[A], [B], [C] or [D])
1 Press the POWER button to turn on the VCR.
2 Turn on the TV and select the video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
3 Press the GUIDE button.
The main on-screen menu will appear on the TV screen.
MENU
1
REVIEW
4
CHANNEL
—————————————————
7 ENGLISH
4 Press the (4) button to select the CHANNEL PRESET operation.
CHANNEL PRESET
1 CATV1
CH SOURCE
3 CH LIST
ADD/ERASE
5 CABLE BOX
SETUP
5 Press the (1) button to select the type of receiving setup you have:
CHANNEL PRESET
1 ANT
CH SOURCE
3 CH LIST
ADD/ERASE
5 CABLE BOX
SETUP
ANT: Internal or external antenna
2 3
SETUP CLOCK
8 FRANÇAIS
END GUIDE
2 AUTO
CHANNEL SET
4 VCR PLUS+
SETUP
END GUIDE
2 AUTO
CHANNEL SET
4 VCR PLUS+
SETUP
END GUIDE
- 33 -