Advertisement
Using your Sunbeam Convection
Panel Heater
1.Place the heater on a flat level surface.
Ensure that the heater is at least 1 metre
away from furniture and curtains.
2.Insert the plug into a 230-240 power outlet.
Turn the power on.
3.Press the switch to either LOW or hIGh
setting.
4.To achieve your desired room temperature
use the Thermostat Control dial which
adjusts the temperature.
5.To turn off your heater, switch your heat
setting button to the 0 position.
6
6.Before storing your heater we recommend
allowing the heater to cool down.
NOTE: Before first use we recommend
switching your heater on in a well ventilated
area to disperse any vapours that have
resulted during the production of this heater.
Once cleared, this will not reoccur.
Advertisement
