Advertisement
Troubleshooting Guide
1. If your heater fails to operate, check the
following:
- Make sure the electrical outlet or circuit
breaker is working..
- Check for obstructions, if obstructions are
present, the heater may have gone over
temperature. If this is the case turn off
the heater at the power outlet, remove the
obstructions and wait for the heater to cool
before turning the heater back on.
Care and Cleaning
Ensure that the heater is switched off and
disconnected from the power outlet before
cleaning.
Carefully wipe the exterior of the heater with
a soft damp cloth and dry thoroughly with a
dry cloth.
Over time, dust may accumulate on the front
grille. This can be removed by wiping with a
damp cloth, or by carefully going across the
grille with a vacuum cleaner or hand held
vacuum.
8
- Check that the thermostat is not set too low.
Turn the dial clockwise to adjust the electric
thermostat. Until the heater restarts.
Do not use harsh or abrasive cleaners to
clean your heater, as these will damage the
surface.
When not in use store the heater in a cool
dry place.
Advertisement
