Menu Screen; Program Screen - ritetemp 8035c Operation Manual

MENU screen

Displayed when the MENU
button is pressed from the
HOME screen.
Touch this area to set
the day of the week.
Calibration
Use this to calibrate your LCD
display to match another
thermometer.
3
PG

PROGRAM screen

Displayed when the
PROGRAM button is
pressed from the
HOME screen.
Copy
Touch this area to copy
current program to the
next day
Set Time Slot
Touch this area to set
the Time Slot you
want to program.
4
PG
Touch this area to set
Left arrow goes back,
right arrow goes forward.
Temperature Swing
Set Day
Set
Touch this to
set temperature
display.
Calibration indicator
This comes on if you
have altered the
calibration of your unit
Set Program Time - touch this
area to set the time of day you
want eachtime period to start.
Left arrow goes back,
right arrow goes forward.
Review - touch this area
to auto cycle through
your program.
Set Program Day
Touch this area to set
the day of the week you
want to program Target
Temps for.
Temp Up / Temp Down arrows.
Touch these to raise and lower each Target Temp.
Set Time
the time of day.
set
o o
C - F
Lock Program
Touch for 5 sec
to lock or unlock
Chirp set Touch this to turn the
audible chirp on or off.
Return HOME When programming
is complete touch this to run your program.
Filter Timer
set
Return
HOME