Troubleshooting - Ideal Air 700899 Owner's Manual

Do not return the unit to the store from which it was purchased.
Contact Ideal Air Support at (877) 9-Ideal-1 or at support@ideal-air.com.
FAULT
Unit does not
operate
Blower wheel
not turning
Unit operating,
but room not
dry
Unit collects too
little water
WARNING: Before attempting to repair, consult the Service Manual
for this unit. This document can be found online at www.Ideal-Air.com.
Contact Support at (877) 9-Ideal-1 or at support@ideal-air.com.

TROUBLESHOOTING

– IMPORTANT –
CAUSE
No power to machine.
Unit not switched on.
Obstructed blower.
1. Not enough time
to dehumidify air.
2. Poor air movement
in room.
3. Excessive moist air
infiltration in room.
1. Room air is too dry.
2. Room temperature
is too low.
SOLUTION
Plug in unit; check power at
outlet and at base of unit.
Switch unit on.
Remove obstruction.
1. Allow more time for
drying.
2. Increase air movement
with fans.
3. Reduce outside air
infiltration into the room.
1. Check humidity with
hygrometer.
2. Increase room
temperature.
3. Check filter and coils;
clean as necessary.