2/4 Pole Adjustment; Electrical Adjustments - Sony 1270Q CRT Setup And Operation Manual

likely see that the tubes do not line up at all. The green tube is your point of
reference and should not be moved at any time.
The red and blue tubes need to be pointed so that the centers of the cross
hairs line up as closely as possible. This is where things start to get difficult.
Skip ahead to the focus section for more info on this.
2.2

Electrical Adjustments

2.2.1

2/4 Pole Adjustment

The magnet adjustments are done by moving the plastic tabs on the
following picture. If they've never been adjusted before, there will be white
paint holding them from moving. Grab a razor blade and cut the paint.
Very Important Note: there is lethal voltage in here, be very careful.