Table of Contents
Advertisement
CONTROLLING YOUR TV WITH THE VCR'S REMOTE
TO MONITOR THE RECORDING
1) Turn on the TV, and set it to the same output channel as the editing VCR channel 3 or 4.
2) Press VCR/TV button on the remote control so that "VCR" appears on the display.
CONTROLLING YOUR TV WITH THE VCR'S REMOTE
This Hitachi remote control can be used with your TV as well as the VCR, as long as your TV comes with a
remote control. This feature comes in handy--you won't have to juggle two remotes.
The remote control is compatible with the fifteen makers of TVs listed below--but don't be alarmed if yours is not
on our list. You may still be able to program the remote for your TV.
Every TV that comes with a remote control is set up to detect certain infrared signals. You need to program the
VCR's remote control to send signals that your TV will recognize and respond to. Here's what to do:
Compatibility
• The remote control is designed to be operated with many televisions and cable converters, but will not work with
every one made. If your TV or cable box does not respond the way it should when you program if as explained
follows, this remote may be incapable of operating it.
• Once you have programmed the remote, you won't have to do it again until you change the batteries.
REMOTE CONTROL OF THE TV
PROGRAMMING THE REMOTE CONTROL OF THE TV
1 Turn on the TV
Turn on the TV (any channel is okay).
2 Program the remote control
Aim the VCR's remote control at your TV set. Hold down the TV button (not the VCR/TV button) while you press
the number corresponding to your brand of television as shown in the chart.
For example; If you have an RCA television, press TV and 0 at the same time. If this button combination sends a
signal that matches with your TV, the channel will change on the TV, and you'll know the remote is set to control
the television.
NOTES:
• If that button combination does not change the TV channel, go through the whole list of button combinations one
by one until you find one that does change your TV channel..
• Also, if your brand of TV is not listed in the chart, try all the number buttons. One of them may work for you.
• If the TV channel still doesn't change after going through all the button combinations listed, it is likely that you
will not be able to program this remote control for your TV.
TV Brands
Press TV and This Number
Hitachi
1
Zenith
2
Sony
3
Magnavox
4
Sanyo
5
Gold Star 1
6
Toshiba 7
Gold Star 2
8
Panasonic 2
9
RCA
0
Panasonic 1
CH (up arrow)
Mitsubishi
CH (down arrow)
- 40 -
Advertisement
Table of Contents
