Table of Contents
Advertisement
setup screen
-
An object hides other objects behind.
Two or more objects overlap or one object divides in multiple portions.
-
-
Too fast object (for a proper detection, one object should be found overlapping between
contiguous frames).
Reflection / blur / shadow due to a strong light such as direct sunlight, illumination, or headlamp.
-
-
In severe snow, rain, wind or in dawn / dusk.
Time schedule
You can configure so that an event will occur at a scheduled time regardless of the actual
occurrence of the event.
1. From the Setup menu, select the
<Event (
2. Click <Time schedule>.
To set the timer event
1. Set <Timer event setup> to <Enable>.
2. Specify the <Activation time>.
• Always : Always activates in operated
mode at the set interval.
• Only scheduled time : Periodically
activates in operated mode at a
specified time and date.
3. Specify the <Transfer interval>.
4. Specify the activation conditions.
• FTP sending : Specify the use of the FTP transfer if an event occurs.
• Record : Specify the use of recording if an event occurs.
5. When done, click [Apply (
64_ setup screen
)> tab.
)].
Advertisement
Table of Contents
