1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Security Camera
  5. iPolis SNV-7080R
  6. User manual

Samsung SNV-7080R User Manual

Hide thumbs Also See for SNV-7080R:
Table of Contents

Advertisement

Quick Links

Download this manual

NETWORK CAMERA

User Manual
SNV-7080R

Advertisement

Table of Contents
loading

Related Manuals for Samsung SNV-7080R

Summary of Contents for Samsung SNV-7080R

  • Page 1: Network Camera

    NETWORK CAMERA User Manual SNV-7080R...

  • Page 2: User Manual

    Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility. Samsung Techwin reserves the right to change the contents of this document without prior notice.

  • Page 3: Overview

    overview IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.

  • Page 4: Explanation Of Graphical Symbols

    overview WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
  • Page 5 Class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Disconnection Device Disconnect the main plug from the apparatus, if it’s defected.
  • Page 6 overview Please read the following recommend safety precautions carefully.  Do not place this apparatus on an uneven surface.  Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area. ...

  • Page 7: Table Of Contents

    CONTENTS Important Safety Instructions OVERVIEW Product Features Recomended PC Specifications Recomended SD/SDHC Memory Card Specifications What’s Included At a Glance Installation INSTALLATION & Inserting/Removing an SD CONNECTION Memory Card Memory Card Information (Not Included) Connecting with other Device Connecting the Camera Directly NETWORK CONNECTION to Local Area Networking AND SETUP...
  • Page 8 overview WEB VIEWER Connecting to the Camera Login Installing ActiveX Installing Silverlight Runtime Using the Live Screen Playback Setup SETUP SCREEN Audio & Video Setup Network Setup Event Setup System Setup Specification APPENDIX Product Overview Troubleshooting Open Source Announcement GPL/LGPL Software License 8_ overview...

  • Page 9: Product Features

    The dustproof and waterproof design makes you feel at ease when installing the product outdoors or exposing it to rain. • SSNR3 (Samsung Super Noise Reduction) The powerful DSP chip reduces the gain noise effectively to remove the time lag so that it can provide a sharp and clear image in a low contrast scene.

  • Page 10: Recomended Pc Specifications

    overview • Video Motion Detection Detects a motion from the video before triggering an event. • Face Detection / Smart Codec Recognizes a face from the camera input video, or transfers a clearer image of your specified area. • Auto Detection of Disconnected Network Detects network disconnection before triggering an event.

  • Page 11: What's Included

    WHAT’S INCLUDED Please check if your camera and accessories are all included in the product package. Appearance Item Name Quantity Description Camera User Manual, Installer S/W CD, CMS S/W DVD Quick Guide Template Product installation guide ASSY-Tapping Screw Used for installation on the wall or ceiling L Wrench Used to remove/fix the dome cover For fixing a screw, Inserted in a hole...

  • Page 12: At A Glance

    overview AT A GLANCE Appearance Item Description Top cover Case cover used to protect the lens and the main unit. Camera Case Covers the lens and camera body. Power Port Used to plug the power cable. ARM-IN BLUE : Used to connect the alarm input signal. ARM-OUT WHITE : Used to connect the alarm output signal.
  • Page 13 Inside Item Description Using the test monitor cable, you can connect to a mobile display for camera Monitor Out test. (for installation) Resets the camera settings to the default. Press and hold it for about 5 seconds to turn off the system indicator and restart the system. If you reset the camera, the network settings will be adjusted so that Reset Button DHCP can be enabled.

  • Page 14: Installation & Connection

    installation & connection INSTALLATION Precautions before installation Ensure you read out the following instructions before installing the camera: • Select an installation site (ceiling or wall) that can endure at least 5 times of the camera weight. • Stuck-in or peeled-off cables can cause damage to the product or a fire. •...
  • Page 15 Installing on the ceiling directly 1. Remove the top cover from the case by referring to the “Disassembling” section. (page 14) 2. Drill a hole (diameter: 5mm, depth: min 35mm) in a desired position of the case bottom and insert the provided plastic anchor (HUD 5) to the end.

  • Page 16: Ceiling Mount

    installation & connection Ceiling mount 1. Remove the top cover from the case by referring to the “Disassembling” section. (page 14) 2. Use the provided template to drill one hole for the camera, and one for the screw (5 mm in diameter, at least 35 mm in depth), and insert the plastic anchor (HUR 5) to the end of the screw hole.

  • Page 17: Optional Accessories For Installation

    Attaching to the unbundled adapter Choose and purchase a necessary one of the following options (unbundled) that is suitable to the installation site or for your convenience. 1. Remove the top cover from the case by referring to the “Disassembling” section. (page 14) 2.
  • Page 18 installation & connection 2. CEILING MOUNT ADAPTOR(SBP-300CM)/ HANGING MOUNT(SBP-300HM1) This adaptor is used when installing the dome camera on a concrete ceiling. 3. POLE MOUNT ADAPTOR(SBP-300PM) This is an adaptor for WALL MOUNT ADAPTOR (SBP-300WM or SBP-300WM1) installation on a pole whose diameter is bigger than 80mm.

  • Page 19: Adjusting The Monitoring Direction

    Adjusting the monitoring direction for the camera Panning Tilting Lens rotation Cover front ❖ Adjusting the monitoring direction You can adjust the camera direction only when the camera is fixed on the ceiling. Where, rotating the camera unit to the left or right is called Pan, adjusting the tilt is called Tilt, and turning the lens on its axis is called Rotate.

  • Page 20: Inserting/Removing An Sd Memory Card

    installation & connection INSERTING/REMOVING AN SD MEMORY CARD  Disconnect the power cable from the camera before inserting the SD memory card. Inserting an SD Memory Card Push the SD memory card in the direction of the arrow shown in the diagram. ...

  • Page 21: Memory Card Information (Not Included)

    MEMORY CARD INFORMATION (NOT INCLUDED) What is a memory card? The memory card is an external data storage device that has been developed to offer an entirely new way to record and share video, audio, and text data using digital devices. Selecting a memory card that’s suitable for you Your camera supports SD/SDHC memory cards.

  • Page 22: Connecting With Other Device

    installation & connection CONNECTING WITH OTHER DEVICE Monitor Out Power Ethernet Monitor Connecting to the monitor Connect the video out port of the camera to the video input port of the monitor.  In the initial installation of the camera, you can connect the camera to the monitor for checking the connection status.

  • Page 23: Power Supply

    Power Supply Use the screwdriver to connect each line (+, –) of the power cable to the corresponding power port of the camera.  Be careful not to reverse the polarity when you connect the power cable. You can also use a router featuring PoE (Power over Ethernet) to supply power to the camera. ...
  • Page 24 installation & connection 1. Connect the AUDIO IN port of the camera with the microphone directly or LINE OUT port of the amplifier that the microphone is connected to. 2. Connect the AUDIO OUT port of the camera with the LINE IN port of the speaker. 3.

  • Page 25: Network Connection And Setup

    network connection and setup You can set up the network settings according to your network configurations. CONNECTING THE CAMERA DIRECTLY TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN 1. Launch an Internet browser on the local PC. 2.

  • Page 26: To A Dhcp Based Dsl/Cable

    network connection and setup CONNECTING THE CAMERA DIRECTLY TO A DHCP BASED DSL/CABLE MODEM INTERNET DSL/Cable Modem External Remote PC Camera DDNS Server (Data Center, KOREA) 1. Use the cross LAN cable to connect the network cable directly to your PC. 2.

  • Page 27: Modem

    CONNECTING THE CAMERA DIRECTLY TO A PPPoE MODEM INTERNET PPPoE Modem External Remote PC Camera DDNS Server (Data Center, KOREA) 1. Use the cross LAN cable to connect the network cable directly to your PC. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet.

  • Page 28: Connecting The Camera To A Broadband Router With The Pppoe/Cable Modem

    network connection and setup CONNECTING THE CAMERA TO A BROADBAND ROUTER WITH THE PPPoE/CABLE MODEM This is for a small network environment such as homes, SOHO and ordinary shops. Camera INTERNET PPPoE or PPPoE or Broadband Cable Modem Cable Modem External Remote Router Camera...

  • Page 29: Buttons Used In Ip Installer

    BUTTONS USED IN IP INSTALLER Item Description Model name of the connected camera. Device Name Click the column to sort the list by model name. However, search will be stopped if clicked during the search. Displays either <Static> or <Dynamic> for the current network connection Mode status.

  • Page 30: Static Ip Setup

    Exits the IP Installer program.  For the IP installer, use only the installer version provided in the installation CD or use the latest one if available. You can download the latest version from the Samsung web site (www. samsungipolis.com). STATIC IP SETUP Manual Network Setup Run <IP Installer_vX.XX.exe>...
  • Page 31 3. In the <Address> pane, provide the necessary information. • MAC (Ethernet) Address : The MAC (Ethernet) address of the applicable camera will be set automatically so you don't need to input it manually.  You can configure the static IP settings only if the DHCP checkbox is unchecked.

  • Page 32: Ip Address : 192.168.Xxx.100

    network connection and setup  The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product. Note that the security and other related issues caused by the unchanged password shall be responsible for the user.

  • Page 33: Dynamic Ip Setup

    3. Enter the password. This is the login password for the “admin” user who accesses the camera. The default password is “4321”.  The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product.

  • Page 34: Port Range Forward (Port Mapping) Setup

    network connection and setup PORT RANGE FORWARD (PORT MAPPING) SETUP If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it. Manual Port Range Forwarding 1.
  • Page 35 Setting up Port Range Forward for several network cameras When several network cameras are connected to one Broadband Router device, you should forward the TCP 943 port of the router to the TCP 943 port of a connected camera.  If you don't set properly the TCP 943 port of the router, you cannot get any video stream from the web page of the camera.

  • Page 36: Connecting To The Camera From A Shared Local Pc

    network connection and setup CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC 1. Run the IP Installer. It will scan for connected cameras and display them as a list. 2. Double-click a camera to access. The Internet browser starts and connects to the camera.

  • Page 37: Web Viewer

    web viewer CONNECTING TO THE CAMERA Normally, you would 1. Launch the Internet browser. 2. Type the IP address of the camera in the address bar. ex) • IP address (IPv4) : 192.168.1.100  http://192.168.1.100 - the Login dialog should appear. •...

  • Page 38: Login

    IP when you try to access the device. To add the IP address to the <DDNS> server, visit www.samsungipolis.com and register your device, and set the DDNS option to <Samsung DDNS> before providing the host name for the DDNS server.

  • Page 39: Installing Activex

    INSTALLING ACTIVEX If connecting to a camera for the first time, you will see the installation message. Then, install the required ActiveX to access the camera and control the video from it in real time. 1. When accessing the start screen of the monitoring page, click the yellow warning message in the top of the page.

  • Page 40: Installing Silverlight Runtime

    web viewer INSTALLING SILVERLIGHT RUNTIME If your PC has not installed Silverlight Runtime or has just installed an old runtime version, you will be redirected to the Silverlight Runtime installation page automatically when accessing the web viewer. 1. Click <Click Here>. 2.
  • Page 41 5. When done, click <Close>. 6. Close and restart the web browser, and try to access the Web Viewer. When Silverlight Runtime is properly installed, you will see the Live screen.  For normal installation, set the Block Popup setting as follows: ex) Internet Explorer ...

  • Page 42: Using The Live Screen

    web viewer USING THE LIVE SCREEN Item Description Monitoring Move to the monitoring screen. Playback Switch to the monitoring screen that plays recording data in the SD memory. Setup Move to the Setup screen. Viewer Screen Displays the Live video on the screen. Alarm Output Activate the Alarm Out port.

  • Page 43: To Capture The Snapshot

    Item Description Digital zoom You can use the mouse wheel to activate the digital zooming. Screen Adjust the screen to the optimal size, and display the Full Screen icon on the Live Optimization, screen. Full Screen Capture Saves the snapshot as an image file in the .bmp format. You can select a profile type in <Video profile>...
  • Page 44 web viewer To toggle the audio sound 1. Click the [Audio ( )] button. The corresponding button will be displayed in the Viewer. 2. Click the button to listen to / mute the sound as you wish. This button operates as a toggle button.

  • Page 45: Playback

    PLAYBACK 1. Click the [Playback ( )] button. 2. Specify the start time and end time of your search. 3. Select a search type. 4. Click the [Search ( )] button. The search results will be displayed in the list. ...
  • Page 46 web viewer To check time information of the playing video 1. Click the [About ( )] button. 2. Date and time information appears on the screen. To back up the searched video 1. Click [ ] on the scene to back up. Save as window appears.

  • Page 47: Setup Screen

    setup screen SETUP You can configure the audio & video, network, event and system settings of the camera via the network. 1. In the Live screen, click [Setup ( 2. The Setup screen appears. AUDIO & VIDEO SETUP Video profile 1.

  • Page 48: To Add A Video Profile

    setup screen To add a video profile You can add as many codecs as necessary so that a variety of profiles can be applied according to the recording condition. 1. Select a profile number. 2. Provide the name and select a codec. 3.

  • Page 49: Video Setup

    What is GOP size? GOP(Group of Pictures) is a set of video frames for H.264 compression, indicating a collection of frames from the initial I-Frame (key frame) to the next I-Frame. GOP consists of 2 kinds of frames: I-Frame and P-Frame. I-Frame is the basic frame for the compression, also known as Key Frame, which contains one complete image data.

  • Page 50: Audio Setup

    setup screen 3. Provide a name and press [OK]. 4. If you want to delete an area, select that area in the list and press [Delete 5. When done, click [Apply ( Audio setup You can configure the I/O settings of the audio source from the camera. 1.
  • Page 51 SSDR (Samsung Super Dynamic Range) Setup In a scene where the difference between bright and dark is severe, you can increase the brightness of the dark area alone to regulate the overall brightness. 1. Select <SSDR>. 2. Set <Mode> to <On>.
  • Page 52 setup screen BLC Setup You can specify a desired area on the video manually and set the area to be displayed more clearly. 1. Select <Backlight>. 2. Set <Mode> to <BLC>. 3. Set <BLC level>. You can change the level to adjust the brightness of the monitoring area.
  • Page 53 WDR Setup It displays a sharp image of the objects in a scene where both bright and dark areas exist. 1. Select <Backlight>. 2. Set <Mode> to <WDR>. 3. Specify the <WDR level>.  WDR is available only if <Megapixel Mode>...
  • Page 54 setup screen • Sens-up limit : Set the work condition to Auto mode in a low contrast scene. • Iris : You can set the camera iris to AUTO or MANUAL to your preference.  For a camera with the shutter type of ESC, the iris will operate properly only if it is set to <Manual>.
  • Page 55 OSD Setup 1. Select <OSD>. 2. Select each item and set it properly. • Camera title : Use alphanumeric characters in the list and enter a desired title in the bottom input line.  You can enter up to 15 characters for the title. •...
  • Page 56 setup screen Smart codec setup Set a desired area of the video incoming from the camera as ROI area and specify the detection sensitivity for the area. 1. From the Setup menu, select the <Audio & Video ( )> tab. 2.

  • Page 57: Focus Setup

    Focus setup You can adjust the Zoom magnification and Focus of the video. 1. Select the <Audio & Video ( )> tab from Setup menu. 2. Click <Focus setup>. 3. Set the Zoom and Focus. • Zoom / Focus : Adjust the Zoom magnification and Focus manually.

  • Page 58: Network Setup

    setup screen NETWORK SETUP Interface 1. From the Setup menu, select the <Network ( )> tab. 2. Click <Interface>. 3. Set the <Interface> and <IPv6 setup> as necessary. • IP type : Select an IP connection type. - Manual : Specify the IP address, Subnet mask, Gateway, DNS1, and DNS2.
  • Page 59 The default is 80(TCP). • VNP port : Set a port used to transfer video signals with the Samsung protocols. • RTSP port : Used to transfer videos in the RTSP mode; the default is 554. • Viewer port : Used to transfer videos to the Web Viewer; the default is 4520.

  • Page 60: Registering With Ddns

    - Password : Enter the password for the DDNS service. (i.e., password that is registered with Dyndns) 5. When done, click [Apply ( Registering with DDNS To register your product with the Samsung DDNS 1. Visit the iPOLiS web site(www. samsungipolis.com) and sign in with a registered account.
  • Page 61 7. Click [REGISTRATION]. The product will be added to the product list that you can check. To connect to the Samsung DDNS in camera setup 1. From the DDNS setup page, set <DDNS> to <Samsung DDNS>. 2. Provide the <Host name> that you registered product domain with the DDNS site.
  • Page 62 setup screen IP filtering You can create a list of IPs that you want to grant or deny access to them. 1. From the Setup menu, select the <Network ( )> tab. 2. Click <IP filtering>. 3. Select <Filtering type>. •...
  • Page 63 Installing the certificate 1. Enter the certificate name. 2. Select the certificate file to be installed and certificate key, and click [Install ( button. Deleting the certificate 1. Click [Delete ( )] button. 802.1x When connecting network, you can choose whether using 802.1x protocol, and then install the certification.

  • Page 64: Event Setup

    setup screen EVENT SETUP FTP / E-mail You can configure the FTP/E-mail server settings so that you can transfer the images stored in the camera to your PC if an event occurs. 1. From the Setup menu, select the <Event ( )>...
  • Page 65 - Sender : Enter the address of the email sender. If the sender address is incorrect, the email from the sender may be classified as SPAM by the email server and thus may not be sent. - Subject : Enter a subject for your email. - Body : Provide the text for the massage.

  • Page 66: Alarm Input

    setup screen 3. Specify the record conditions. • Record profile : Display the number of profile to record. • Record 1 fps forcibly : Only one frame per second will be recorded regardless of the existing record profile. - For H.264, it will be enabled only if the bit rate is less than 4800. - For MJPEG, it will be enabled only if the resolution is less than 800x600.

  • Page 67: Motion Detection

    5. Specify an operation that will perform if an alarm occurs. • Alarm output : Select whether to set the alarm output if an alarm is incoming, and specify the alarm output time. • E-mail sending : Specify the use of email transfer in the alarm input setup. •...

  • Page 68: Time Schedule

    setup screen  If you are controlling the Pan/Tilt/Zoom operation or fitting the focus of the camera, the motion sensor may not work.  If camera is capturing a close object, the motion detection capability may degrade. In the following case, Motion detection function which is initially set may be worked abnormally.
  • Page 69 Network disconnect You can perform the saving/relay/preset operation after receiving an event of a physically disconnected network. 1. From the Setup menu, select the <Event ( )> tab. 2. Click <Network disconnect>. 3. Specify the use of “Network disconnect”. 4. Specify the activation time and activation condition.

  • Page 70: System Setup

    setup screen SYSTEM SETUP Product information 1. From the Setup menu, select the <System ( )> tab. 2. Click <Product information>. 3. Check the camera information, or provide details according to your network environment. • Device name : Provide a device name that will be displayed on the Live screen.
  • Page 71 • System time setup : Specify the time and date that will be applied to your system. - Manual : Specify the time manually. - Synchronize with NTP server : Sync with the time of the specified server address. - Synchronize with PC viewer : Synchronize the time with the connected PC. 4.
  • Page 72 setup screen Upgrade / Reboot 1. From the Setup menu, select the <System ( )> tab. 2. Click <Upgrade / Reboot>. 3. Select a desired item and set it appropriately. • Upgrade : Performs upgrading the system. • Factory default : Resets the system to the factory default.
  • Page 73 To save the current settings and restore the backup settings 1. Click [Backup]. The Save As dialog should appear. 2. Specify the backup path with a proper file name, and click [Save]. The backup file will be saved to the specified path in the format of “.bin”.
  • Page 74 setup screen You can check the system log or event log. 1. From the Setup menu, select the <System ( )> tab. 2. Click <Log>. 3. Select a log type. • Syslog : You can check the system logs where any system changes are recorded including the time information.

  • Page 75: Appendix

    appendix SPECIFICATION Items Description Imaging Device 1/2.8" 3M PS CMOS Total Pixels 2,144(H) X 1,588(V) Effective Pixels 2,096(H) X 1,561(V) Scanning System Progressive Video Color : 1 Lux (F1.2, 50IRE), 0.017Lux (Sens-up 60X) Min. Illumination B/W : 0 Lux (F1.2, 50IRE, IR LED ON) S / N Ratio 50dB CVBS : 1.0 Vp-p / 75Ω...
  • Page 76 Backlight Compensation Off / BLC / HLC Wide Dynamic Range Off / On (Full HD WDR) Contrast Enhancement SSDR (Samsung Super Dynamic Range) (Off / On) Digital Noise Reduction SSNRIII (2D+3D Noise Filter) (Off / On) Digital Image Stabilization Motion Detection...
  • Page 77 Items Description Ethernet RJ-45 (10/100BASE-T) Video Compression Format H.264, MJPEG <2M Mode> 1920x1080P(Full HD), 1280x1024, 1280x960, 1280x720P(HD), 1024x768, 800x600, 800x450, 640x480, 640x360, 320x240, 320x180 Resolution <3M Mode> 2048x1536, 1920x1080P(Full HD), 1600x1200, 1280x1024, 1280x960, 1280x720P(HD), 1024x768, 800x600, 800x450, 640x480, 640x360, 320x240, 320x180 <2M Mode>...
  • Page 78 appendix Items Description IPv4, IPv6 TCP/IP, UDP/IP, RTP(UDP), RTP(TCP), RTSP, NTP, Protocol HTTP, HTTPS, SSL, DHCP, PPPoE, FTP, SMTP, ICMP, IGMP, SNMPv1/v2c/v3(MIB-2), ARP, DNS, DDNS HTTPS(SSL) Login Authentication Digest Login Authentication Security IP Address Filtering User access Log 802.1x Authentication Streaming Method Unicast / Multicast Network...

  • Page 79: Product Overview

    PRODUCT OVERVIEW Unit : mm (inch) English _79...
  • Page 80 appendix Flushed mode 80_ appendix...

  • Page 81: Troubleshooting

    TROUBLESHOOTING PROBLEM SOLUTION Check to make sure that the camera’s Network settings are appropriate. Check to make sure that all network cables have been connected properly. If connected using DHCP, verify that the camera is able to acquire I can’t access the camera from a dynamic IP addresses without any problem.
  • Page 82 appendix PROBLEM SOLUTION Check if the memory card is defective. Cannot record into the SD memory card. Check if the write protection tab of the memory card is set to “LOCK”. Check if the memory card is inserted in the proper direction. Operation of memory card that is formatted by other devices is not guaranteed with A SD memory card is inserted but this camera unit...

  • Page 83: Open Source Announcement

    Its advanced feature-set (FastCGI, CGI, Auth, Output-Compression, URL-Rewriting and many more) make lighttpd the perfect webserver- software for every server that suffers load problems. For more additional information, send email to help.cctv@samsung.com. Copyright (C) 2004, Kneschke, incremental All rights reserved.
  • Page 84 Copyright (c) 1998-2001 University College London All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted provided that the following conditions are met : 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

  • Page 85: Gpl/Lgpl Software License

    GPL/LGPL. You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution might be charged.
  • Page 86 original authors' reputations. you receive it, in any medium, provided that you conspicuously and appropriately Finally, any free program is threatened publish on each copy an appropriate constantly by software patents. We wish copyright notice and disclaimer of to avoid the danger that redistributors of a warranty;...
  • Page 87 based on the Program is not required performing source distribution, a to print an announcement.) complete machinereadable copy of the corresponding source code, These requirements apply to the modified to be distributed under the terms work as a whole. If identifiable sections of Sections 1 and 2 above on a of that work are not derived from medium customarily used for software...
  • Page 88 However, parties who have received then the only way you could satisfy both copies, or rights, from you under this it and this License would be to refrain License will not have their licenses entirely from distribution of the Program. terminated so long as such parties If any portion of this section is held invalid remain in full compliance.

  • Page 89: End Of Terms And Conditions

    a version number of this License which TO IN WRITING WILL ANY applies to it and "any later version", you COPYRIGHT HOLDER, OR ANY have the option of following the terms and OTHER PARTY WHO MAY MODIFY conditions either of that version or of any AND/OR REDISTRIBUTE DAMAGES, later version published by the Free Software INCLUDING ANY GENERAL, SPECIAL,...
  • Page 90 WARRANTY ; without even the implied program is a subroutine library, you may warranty of MERCHANTABILITY or consider it more useful to permit linking FITNESS FOR A PARTICULAR PURPOSE. proprietary applications with the library. If See the GNU General Public License for this is what you want to do, use the GNU more details.
  • Page 91 or asking you to surrender the rights. development and use of software on Therefore, you have certain responsibilities general-purpose computers, but in those if you distribute copies of the software, or if that do, we wish to avoid the special danger you modify it: responsibilities to respect the that patents applied to a free program freedom of others.
  • Page 92 An interactive user interface displays performing those activities but which are not “Appropriate Legal Notices” to the extent part of the work. For example, Corresponding that it includes a convenient and prominently Source includes interface definition files visible feature that (1) displays an appropriate associated with source files for the work, copyright notice, and (2) tells the user that and the source code for shared libraries and...
  • Page 93 3. Protecting Users' Legal Rights From c) You must license the entire work, as a Anti-Circumvention Law. whole, under this License to anyone who comes into possession of a copy. This No covered work shall be deemed part of an License will therefore apply, along with effective technological measure under any any applicable section 7 additional terms,...
  • Page 94 model, to give anyone who possesses A “User Product” is either (1) a “consumer the object code either (1) a copy of the product”, which means any tangible personal Corresponding Source for all the software property which is normally used for personal, in the product that is covered by this family, or household purposes, or (2) anything License, on a durable physical medium...
  • Page 95 or installed by the recipient, or for the User works containing it; or Product in which it has been modified or c) Prohibiting misrepresentation of the origin installed. Access to a network may be of that material, or requiring that modified denied when the modification itself materially versions of such material be marked in and adversely affects the operation of the...
  • Page 96 or modify it is void, and will automatically from the original licensors, to run, modify terminate your rights under this License and propagate that work, subject to this (including any patent licenses granted under License. You are not responsible for enforcing the third paragraph of section 11).
  • Page 97 Each contributor grants you a non-exclusive, prohibits the exercise of, or is conditioned worldwide, royalty-free patent license under on the non-exercise of one or more of the the contributor's essential patent claims, to rights that are specifically granted under this make, use, sell, offer for sale, import and License.
  • Page 98 work, and to convey the resulting work. TO, THE IMPLIED WARRANTIES OF The terms of this License will continue to MERCHANTABILITY AND FITNESS FOR A apply to the part which is the covered work, PARTICULAR PURPOSE. THE ENTIRE RISK but the special requirements of the GNU AS TO THE QUALITY AND PERFORMANCE Affero General Public License, section 13, OF THE PROGRAM IS WITH YOU.
  • Page 99 USA Everyone is permitted to copy and we gave you. You must make sure that distribute verbatim copies of this license they, too, receive or can get the source document, but changing it is not allowed. code. If you link other code with the library, you must provide complete object files to [This is the first released version of the Lesser the recipients, so that they can relink them...
  • Page 100 Public License therefore permits such a “work that uses the library”. The former linking only if the entire combination fits contains code derived from the library, its criteria of freedom. The Lesser General whereas the latter must be combined with Public License permits more lax criteria for the library in order to run.
  • Page 101 is covered only if its contents constitute a well-defined independent of the application. work based on the Library (independent of Therefore, Subsection 2d requires that any the use of the Library in a tool for writing it). application-supplied function or table used Whether that is true depends on what the by this function must be optional: if the Library does and what the program that...
  • Page 102 it is irreversible for that copy, so the ordinary though the source code is not. Whether this GNU General Public License applies to all is true is especially significant if the work subsequent copies and derivative works can be linked without the Library, or if the made from that copy.
  • Page 103 1 and 2 above); and, if the work is either source or binary form) with the major an executable linked with the Library, components (compiler, kernel, and so with the complete machine readable “ on) of the operating system on which the work that uses the Library”, as object executable runs, unless that component code and/or source code, so that the...
  • Page 104 it. However, nothing else grants you is intended to apply, and the section permission to modify or distribute the as a whole is intended to apply in other Library or its derivative works. These circumstances. actions are prohibited by law if you do It is not the purpose of this section to not accept this License.

  • Page 105: How To Apply These Terms To Your New Libraries

    later version published by the Free Software PERMITTED ABOVE, BE LIABLE TO Foundation. If the Library does not specify YOU FOR DAMAGES, INCLUDING a license version number, you may choose ANY GENERAL, SPECIAL, any version ever published by the Free INCIDENTAL OR CONSEQUENTIAL Software Foundation.

  • Page 106: Openssl License

    WARRANTY; without even the implied use in the OpenSSL Toolkit. (http://www. warranty of MERCHANTABILITY or openssl.org/)” FITNESS FOR A PARTICULAR PURPOSE. 4. The names “OpenSSL Toolkit” and See the GNU Lesser General Public “OpenSSL Project” must not be used to License for more details.
  • Page 107 Original SSLeay License 4. If you include any Windows specific code (or a derivative thereof) from the apps Copyright (C) 1995-1998 Eric Young (eay@ directory (application code) you must cryptsoft. com) All rights reserved. This include an acknowledgement: “This package is an SSL implementation written product includes software written by Tim by Eric Young (eay@cryptsoft.
  • Page 108 Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.
  • Page 109 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 www.samsungcctvusa.com...

Table of Contents