Sending Pushbutton Tones - Hitachi HCX5000I User Manual

C 2: A
HAPTER DDITIONAL

Sending Pushbutton Tones

About
pushbutton
tones
Sending tones
<TONE> key
status
HCXTD840, Issue 1, July 2001
O
PERATIONS
Pushbutton tones are generated by pressing keys on the
keypad while you are connected to pushbutton-controlled
equipment.
To send tones, you must first press the <TONE> key. For
example, to retrieve a message from a voice message
system (VMS), you press the <TONE> key while you are
connected to the VMS to send pushbutton tones in
response to prompts from the VMS.
The VMS may direct you to press P to play your message.
Depending on your actions, the following may occur:
If the <TONE>
key is...
Activated
Not activated
When you finish sending pushbutton tones, press the
<TONE> key again.
S
ENDING
This happens when you press 7
(PRS)
Pushbutton tones are sent to the VMS
the VMS is placed in consultation
hold and another CAP is activated.
P T
USHBUTTON ONES
2-87