Ryobi P125 Operator's Manual page 8

BATTERY PACK RED LED
Power
Without battery
OFF
pack
Evaluate
Hot battery pack Flashing
Cold battery pack Flashing
Deeply discharged Flashing
Defective Battery Pack
Defective Battery Flashing
• I f defective, try to repeat the conditions a second time by removing and reinstalling the battery pack. If the LED status
repeats a second time, try charging a different battery.
• I f a different battery charges normally, dispose of the defective pack (see Maintenance section).
• I f a different battery also indicates "Defective," the charger may be defective.
Defective Battery Port
Alternating
Defective Port
Flash
• I f defective, try to repeat the conditions a second time by removing and reinstalling the battery pack. If the LED status
repeats a second time, try charging a different battery or unplug charger for one minute, then plug in.
• I f a different battery also indicates "Defective," the charger may be defective. See your authorized service center.
Charging
Fast charging ON
Full
OFF
—
OPERATION
LED FUNCTIONS
GREEN LED ACTION
Blue LED will fade.
OFF
Ready to charge battery pack.
When battery pack reaches cooled temperature, charger begins
OFF
charge mode.
When battery pack reaches warmed temperature, charger begins
OFF
charge mode.
Charger pre-charges battery until normal voltage is reached, then
OFF
begins charge mode.
Flashing Battery pack is defective.
Alternating
Charger is defective.
Flash
Flashing
ON Fast charging is complete; charger maintains charge mode.
8 — English