Table of Contents
Advertisement
EN
50
• Channel: current channel. Alternatively, press the
green color key to display the list of available
channels.Then scroll to the channel on which the
program you want to record is broadcast using the
t or y key, and press OK to select it.
• Repeat: set Once for a single recording,
Monday/.../Sunday to record on such day every
week,Week-end to record on both Saturday and
Sunday every week,Weekdays to record from
Monday to Friday every week, or every day to
record once every day.
If you set a recording from the TV guide or using the
TIMER key, the date, start time and end time are
already set.
- Press TIMER.
Interrupting a recording
A recording is in progress. Recording is signaled by the
front LED blinking green in TV or Radio mode or
blinking orange if your receiver is in standby.
To interrupt a recording in progress:
- If your receiver is in standby, press P+, P-, or any
number key of the remote control.
- Press the key sequence TIMER then 0.The LED is
no longer blinking and you can change channels.
When a recording is active, you cannot change digital
channels, but you can switch to analog TV using the
TV/STB key and zap through analog channels.
Channel Preset
Channels Preset is used to modify the channels
numbering or to remove a channel from the What's on
view of the TV guide.
- Press i.
- Scroll to an available channel. Available channels are
marked with a cross.
- Press OK to remove this channel from the What's
on view.
- Press i to modify the channel numbering. Enter the
new channel number – 3 digits, for instance enter
"008" to assign number 8 to a given channel.
Advertisement
Table of Contents
