Table of Contents
Advertisement
Advanced settings
Remote control setting
EN
To change the setting of your remote control:
- Simultaneously press number keys 1 and 3 and hold them for at least 5 seconds.
- Simultaneously release these two keys.
- Enter the new setting within the next 60 seconds:
• Either press 1 (default setting),
• Or press 2 (alternative setting).
You may reset your remote control to its default setting by removing the batteries
and reinserting them after more than 3 minutes.
Connection for Easy Record
This connection allows automatic recording without requiring you to program your VCR
or DVD recorder.You must, however, set a timer on your receiver as described in
paragraph Scheduled Recordings.
Prior to choosing this connection method:
• Consult the user manual of your VCR or DVD recorder to check if and how this
feature is supported. Most Philips VCR and DVD recorders support an Easy Record
options.
• Check that your TV and VCR or DVD are both fitted with two SCART sockets.
• Incorporate your receiver in your existing installation as described below:
to AC outlet
58
RF Cable
TV set
PHILIPS
PHILIPS
EXT 2
EXT 1
(VCR or DVD control)
Terrestrial Receiver
EXT 1
EXT 2
VCR/DVD
ANT IN
ANT OUT
For optimum configuration
Advertisement
Table of Contents
