Starting The Projector - Hitachi CP-A200 User Manual

8. Starting the projector

Turn on the projector and the connected devices. Turn on the projector ahead of other
connected devices, unless mentioned in the manuals.
For this projector, follow the procedure below.
Press the side marked " I " of the power switch,
1.
as the power-on position.
The POWER indicator lights up in orange.
NOTE
• For a couple of seconds after the power
indicator lights up, wait to use the control
buttons (on the projector and remote control).
The buttons may not work soon.
Confirm that there is nothing that the lens door
2.
hits while opening.
Then, press the STANDBY/ON button (on the
projector or remote control).
The lens door opens, the projection lamp lights
up, and the POWER indicator begins to blink
green.
When the projector starts completely, the indicator will
turn steady green.
NOTE
• This projector has the DIRECT POWER ON function. For details, see the Operating
Guide in the CD.
• Install the projector in the way specified in this manual. Otherwise the projection lamp
may not light.
WARNING
■ Never look into the projection lens or mirror while the projection lamp lights, since the
projection lamp ray may cause a trouble on your eyes.
CAUTION
■ Be careful not to pinch your finger with the lens door, as it may cause an injury.
8
d11_01CP-A200_CO_ENG.indd 8
POWER indicator
STANDBY/ON button
LAMP
TEMP
POWER
STANDBY/ON
INPUT
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY FREEZE VOLUME
ON ＋
OFF ー
KEYSTONE MY BUTTON MUTE
1 2
FOCUS D-ZOOM
- + - +
POSITION MENU
ENTER
ESC RESET
STANDBY/ON button
Power
switch
2009/12/22 9:37:55