Assembly - Ryobi P530 Operator's Manual

UNPACKING
This product has been shipped completely assembled.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Speed Saw with Depth Adjustment Ring
Bits (2)
Collet
Collet Adaptor
Circle Cutter
Wrench
Operator's Manual
WARNING:
If any parts are missing do not operate this tool until the
missing parts are replaced. Failure to do so could result
in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
tool when assembling parts.

ASSEMBLY

REMOVING DEPTH ADJUSTMENT RING
See Figure 2.
 Remove battery pack from speed saw.
 Place wrench in tab on depth adjustment ring.
 Depress spring-loaded tab.
 Lift depth adjustment ring off tool.
ASSEMBLING CIRCLE CUTTER
See Figure 3.
 Remove battery pack from speed saw.
 Attach handle with screw provided.
 Attach pivot point knob with nut provided.
HANDLE
8
TAB
WRENCH
SCREW
NUT
PIVOT POINT
KNOB
Fig. 2
Fig. 3