Ryobi P530 Operator's Manual page 14

WARNING:
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities con-
tains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of
these chemicals are:
• l ead from lead-based paints,
• c rystalline silica from bricks and cement and other masonry products, and
• a rsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment,
such as those dust masks that are specially designed to filter out microscopic particles.
• SERVICE
Now that you have purchased your product, should a need ever exist for repair parts
or service, simply contact your nearest Authorized Service Center. Be sure to provide
all pertinent facts when you call or visit. Please
Authorized Service Center. You can also check our web site at www.ryobitools.com for a
complete list of Authorized Service Centers.
• MODEL NO. AND SERIAL NO.
The model number of this product will be found on a plate attached to the motor housing.
Please record the model number and serial number in the space provided below.
• HOW TO ORDER REPAIR PARTS
When ordering repair parts, always give the following information:
• MODEL NUMBER
• SERIAL NUMBER
Ryobi is a registered trademark of Ryobi Limited used under license.
®
983000-512
8-10-10 (REV: 08)
OPERATOR'S MANUAL
18 VOLT
SPEED SAW™
P530
P530
ONE WORLD TECHNOLOGIES, INC.
1428 Pearman Dairy Road, Anderson, SC 29625
Phone 1-800-525-2579
www.ryobitools.com
call 1-800-525-2579 for your nearest
Patent No. D477,758