Features - Ryobi P530 Operator's Manual

PRODUCT SPECIFICATIONS
Motor ......................................................................................................................................................................18 Volt DC
Switch ............................................................................................................................................................... On/Off Switch
No Load Speed .......................................................................................................................................26,000 r/min. (RPM)
Collet .............................................................................................................................................................................1/4 in.
Collet Adaptor ...............................................................................................................................................................1/8 in.
DEPTH
ADJUSTMENT RING
BIT
KNOW YOUR SPEED SAW
See Figure 1.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all op-
erating features and safety rules.
SWITCH
Your speed saw has a conveniently located slide
SPINDLE LOCK
A spindle lock secures the spindle and allows you to easily
loosen the collet nut and change bits.
NOTE: Do not run speed saw with spindle lock engaged.

FEATURES

SPINDLE
COLLET
NUT
ADJUSTING
KNOB
DEPTH ADJUSTMENT RING
Your speed saw is equipped with a depth adjustment
ring that allows you to adjust the depth of cut up to
1 in.
CIRCLE CUTTER
The circle cutter enables you to quickly cut circles from
3.5 in. in diameter to 12 in. in diameter.
ERGONOMIC DESIGN
switch.
The design of your speed saw provides for easy handling
and maintaining proper control when cutting. It has been
designed to be comfortable and easy to grasp when operat-
ing in different positions or at different angles.
7
LOCK
SWITCH
Fig. 1