Pairing Steps; Replacing Batteries; Viewing Guidelines - Samsung SSG-4100GB User Manual

3d active glasses
Hide thumbs Also See for SSG-4100GB:
Table of Contents

Advertisement

+
Pairing steps
1.
Turn on the lY, and then move the glasses within
19.5
inches of the TV.
2.
Press the power button on the 3D glasses briefly. The 3D glasses will power on and pairing
will start.
3.
The message
"3D
glasses are connected to TY." will be displayed on the TV screen when
the pairing is successfully completed.
~
If
the pairing failed, the 3D glasses will power off.
~
If the first attempt to pair fails, power the TV off and on again and perform step 2.
~
How to pair again: Press
the power button on the 3D glasses for more than 1
seconds.
<Pairing is needed again in the following situations:>
- If the 3D glasses do not function, even when the power button is pressed on
the
3D TV
after repair.
- If you want to view a 3D video on a different for all 2011 and 2012 Samsung D,E and
ES series 3D TY.
+
Replacing the Batteries
If
the red LED blinks every two seconds continually, replace the batteries with new ones.
.
.
·~------~
Press
down
the edge
of the flap
Push
out
the flap
Replace the
battery
Put the flap
back
on
with
a
OON
one
Swing
the
flap
open
Push
the flap down
l.flitl it clicks
~
Please
insert the battery in the same direction as indicated.
I
+Viewing guidelines
When viewing a 3D video under a fluorescent lamp (50 Hz - 60 Hz) or
3-wavelength lamp, you may notice a small amount of screen flickering.
*
If this occurs, dim or turn off the light.
Switching the input mode while watching a 3D movie may disable the 3D function
on the TV. As a result, the 3D glasses may not function and the movie may not
be displayed properly.
• If the
30 glasses are moved outside of their working distance, the signal from the
TV will disconnect and the glasses' 3D function will turn off after several seconds.
The 30 glasses will power off after
the
30 function turns off. When this happens,
the
red
LED will turn on for 3 seconds.
*
Under some circumstances,
the
3D glasses may malfunction due to interference
from other devices.
Ensure you are within the working distance of the glasses when you view a 3D
video.
*
The
images
may not be viewable in 3D if you move outside of the working distance
for 3 seconds.
If you lie on your side while watching TV with 3D active glasses, the picture may
appear dark or may not be visible.
The 30
glasses may
not work properly
due
to interference from other 30
products or electronic devices that operate on the 2.4GHz frequency such
as a
microwave
oven or
Internet
AP. If the 3D function malfunctions due to
interference, please move all other electronic or wireless communication devices
as far away from the glasses and the TV as possible.
The 3D effect
may
be experienced differently
depending
on the viewer. You
may not notice the 3D effect at all if you wear glasses and have an unusual
prescription.
If a part of the 3D glasses or lenses is
defective
or damaged, it cannot be
repaired and the glasses should be replaced. If the glasses stop working within
the warranty period, the glasses can be repaired or
replaced
for free. If the
glasses have been damaged
due
to
the
fault of the customer or the warranty
period has expired, a new pair of glasses will
have
to be purchased.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents